|Minimum Order Quantity||1500 Square Feet|
|Packaging Size||8 Litres|
|Usage||Waterproofing of Garden Slabs, Flower Pots, Fountains etc.|
|Product Type||Polyurethane Liquid Applied, Two Component, Solvent Free|
|Application||Mix and Spread With Paint Roller|
Drythane is a 100 percent Solids, 2 component coating system of high quality polyurethane that is non-combustible and does not emit noxious odour. It has been formulated as superior grade waterproofing. Drythane provides extended lifelong protection to concrete and other masonry. After the surface is coated, it is completely impenetrable by water. You can make the green garden roofs of your dreams with water fountains, swimming pools etc. This lasting product has a working life of 20 years and more.
Seamless, Paint Roller Applied Membrane
Liquid polyurethane which is applied to a thickness of approx. 2000 microns. The two reactants are mixed together, poured on the surface that has to be coated and dispersed using foam rollers. Special 100% solids, 2 component Polyurethane Primer which is tolerant to dampness, seals the surface of the concrete before the Drythane maincoat is applied. The coating can even be applied in humid conditions.Not affected by Water
There is zero effect as a result of Drythane being submerged into water. As per Procedure 7.4 (Long Term Immersion) of ASTM D 570 the saturation weight gain is less than 0.60%. This property has no equal amongst its contemporaries making it the ideal waterproofing membrane for rooftop gardens, water ponds, water tanks, pools etc.Hard and Resilient Film
Drythane is a very resilient film with a tested tensile strength of greater than 2,900 Psi and 65 Shore D hardness! A lot of cost can be saved as further reinforcement and protection by tiles etc. is not required. An external Covering for aesthetic purposes can be used if desired. Drythane suffers from no degradation as a result of exposure to sunlight (UV), heat or rain.Flexible, Can Span Cracks
Drythane has an elongation of over 50% and is very elastic. The coating will not crack dude to temperature cycling and creation of new hairline cracks in the concrete substrate.Bonds strongly
Drythane bonds so strongly in “pull off” tests, the coating does not disbond but the concrete itself breaks.ADD on Heat Reflective Top Coat
After the installation of Drythane membrane the coating can be covered with, non-woven fabric, drainboard, soil and you can plant a lawn. This will keep indoors cool by providing thermal insulation.
Three liquid applied layers which are chemically fused together make up the Drythane system. The three are environment-friendly and do not contain any solvent or emit any vapors or smells. They suitable for lining water tanks because they are nontoxic. Because of the absence of any solvent, the wet film thickness is equal to dry film thickness. E.g. A product containing half solvent will require twice the number of liters to get an equal thickness as Drythane which has no solvent. Drythane cures extremely fast and one can walk on in it in a couple of hours. It can be left uncovered for normal use or for decorative purposes it may be covered with tiles or marble flooring etc.
Drythane system components are as under:PIV Primer:
Solvent less, 2 component primer which is moisture tolerant with outstanding adhesion to damp and dry concrete. The primer easily penetrates the concrete surface where it reacts with residual moisture to seal and strengthen the surface of the concrete.Main Coat:
Solvent less, 2 component polyurethane coating membrane with excellent resistance to water immersion and
mechanical strength. Liquid applied using rollers, the product is a seamless membrane which bonds very strongly to concrete.Optional Heat Reflective Coat:
Solvent less, 2K colorfast, aliphatic Polyurethane Coating. Reflects radiation from the sun and reduces indoor temperatures.Price Range:
Rs. 50-100/Square Feet